Determining Weights in Multi-Criteria Decision Making Based on Negation of Probability Distribution under Uncertain Environment

: Multi-criteria decision making (MCDM) refers to the decision making in the limited or inﬁnite set of conﬂicting schemes. At present, the general method is to obtain the weight coefﬁcients of each scheme based on different criteria through the expert questionnaire survey, and then use the Dempster–Shafer Evidence Theory (D-S theory) to model all schemes into a complete identiﬁcation framework to generate the corresponding basic probability assignment (BPA). The scheme with the highest belief value is then chosen. In the above process, using different methods to determine the weight coefﬁcient will have different effects on the ﬁnal selection of alternatives. To reduce the uncertainty caused by subjectively determining the weight coefﬁcients of different criteria and further improve the level of multi-criteria decision-making, this paper combines negation of probability distribution with evidence theory and proposes a weights-determining method in MCDM based on negation of probability distribution. Through the quantitative evaluation of the fuzzy degree of the criterion, the uncertainty caused by human subjective factors is reduced, and the subjective error is corrected to a certain extent.


Introduction
Multi-criteria decision making (MCDM) refers to the decision making in the limited or infinite set of conflicting schemes. According to whether the alternatives are limited or infinite, MCDM can be divided into multi-attribute decision making (limited) and multi-objective decision making (infinite). In essence, multi-attribute decision-making is mainly used to study the evaluation and optimization of known schemes, and multi-objective decision-making is mainly used to study the planning and design of unknown schemes. This paper mainly discusses the multi-attribute decision-making problem with multiple conflicting attributes. According to the performance of each scheme under different criteria, it carries out a comprehensive evaluation, and then selects the best scheme from the limited schemes. Most of the project decision-making problems in our life can be modeled as multi-criteria decision making problems [1][2][3][4][5]. Because of its universality and importance, the exploration of such problems has shown progress. Many math tools are presented to deal with multi-criteria decision-making, such as fuzzy sets [6][7][8][9][10][11], which offer a framework to address uncertainty and vagueness; soft sets [12][13][14]; evidence theory [15][16][17][18][19], which enables any union of classes to be addressed and expresses both uncertainty and imprecision; Z numbers [20], which can not only express uncertainty, imprecision and incompleteness of information but can also represent the reliability of information; D numbers [21,22], which are more capable of expressing and handling both uncertainty and imprecision; network modeling [23][24][25]; etc. [26].
In the process of solving multi-criteria decision making problems, the determination of criteria weight is very important. It is used to reflect the relative importance of a certain criterion. If a certain criterion is relatively important, it is given a relatively large weight; otherwise, it is given a relatively small weight. There are three methods to determine the weight: subjective method, objective method, and comprehensive method. At present, the general solution is the comprehensive method. First, the alternatives are subjectively evaluated by experts based on various criteria. Then, the linguistic evaluation is converted to the corresponding quantitative evaluation; a comprehensive measure of subjective evaluation and objective reflection is calculated through certain rules; and finally the alternatives are evaluated, ranked and optimized [27,28]. On this basis, Fei et al. developed a MCDM method where the evaluation information is expressed and handled by Dempster-Shafer theory [29]. In the evaluation of a scheme, the evaluation under each criterion affects the final result to some extent [30][31][32]. Due to the relative importance difference between different criteria, the final evaluation results are obtained by evaluating the importance degree of each criterion and weighting the evaluation based on each criterion, respectively. The relatively important criterion has a larger weight, and the corresponding evaluation of the criterion has a greater impact on the final results. On the contrary, the relatively unimportant criterion has a smaller weight, and the corresponding evaluation of the criterion has a smaller impact on the final result. Thus, we need to assign an appropriate weight to each influencing factor carefully to reduce the impact of subjective factors on the result. To solve this problem, we carefully studied some methods to determine the combination weight, such as the method for obtaining ordered weighted average OWA weights proposed by Xu, which can relieve the influence of unfair arguments on the decision results [33]; the method to obtain a weights vector [34] proposed by Lamata et al.; the PPMIS (Project and Portfolio Management Information Systems) selection/evaluation approach that combines TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) with intuitionistic fuzzy group decision making presented by Gerogiannis et al. [35]; and two reliability-based combination rules are used to synthesize multi-source information [36]. Furthermore, to improve the level of decision-making in uncertain environment, researchers have previously carried out long-term and in-depth studiesy. Srivastava et al. defined a new entropy function for determination of uncertainty associated with the negation of a probability distribution and the events associated with it [37]. Srivastava et al. also developed uncertainty measures that measure the uncertainty associated with the negation of a probability distribution [38]. Luo and Deng presented a new definition of negation of BBA [39], which is used to measure fuzziness for D-S theory. Xie and Xiao proposed negation method of BPA based on the maximum uncertainty [40]. The negation of probability distribution provides a new view to represent the uncertainty information, which leads to the application of negation of probability distribution in related fields and in-depth exploration [41]. In addition, the negation model has the maximum entropy allocation, which attracts studies on uncertainty measures that can be applied in the negation process.
Recently, Xiao proposed a method of evidence fuzzy multi-criteria decision-making based on belief entropy, named as EFMCDM [42]. The combination of D-S evidence theory and belief entropy should be used to solve the problem of multi-criteria decision making. First, the experts evaluate the linguistic rating of all alternatives and the importance of each criterion based on each criterion. Then, the fuzzy number is used to transform the language level evaluation into quantitative evaluation of numbers, and then the weighted decision matrix is obtained through a series of calculations. Then, the D-S evidence theory is used to model the whole scheme into a complete identification framework, and the BPA of each criterion is generated by using the belief entropy. After fusing multiple pieces of evidence, the best scheme is selected according to the belief value of the alternatives. In the process of decision-making, EFMCDM considers the influence of subjective and objective weight, and builds a quantitative model of uncertainty, which successfully reduces the uncertainty brought by human subjective cognition and improves the decision-making level.
However, EFMCDM does not consider the fuzziness of evaluation criteria. To further improve the decision-making level, this paper proposes a weights-determining method in MCDM based on negation of probability distribution [43] under uncertain environment. In the process of constructing the weighted decision matrix, it can be found that the column elements in the final weighted decision matrix satisfy the probability distribution. The probability distribution of each criterion has its corresponding negation, thus the distance between the probability distributions and its negation can be used to measure the fuzzy degree of the corresponding criterion. Specifically, this paper mainly deals with the weight determination method of the multi-attribute decision-making problem, aiming at the optimization problem of limited schemes, using the negation of (discrete) probability distribution to propose feasible solutions. As defined in the original paper [43], the negation of a (discrete) probability distribution is based on the sample size and closely related to the sample probability measure. Because the number of schemes and criteria is limited, and the weights of different schemes with the same criteria meet the definition of discrete distribution after normalization, the negation of probability distribution can be applied to the weight determination of multi-attribute decision making.
Here is an example to understand the above ideas. Two sets of propositions are considered: proposition "he may be a good man" and its negative proposition "he may not be a good man", and proposition "he is absolutely a good man" and its negative proposition "he is absolutely not a good man". Compared with the second group, the two propositions in the first group can obviously feel their distance is closer, and this group of propositions is also more fuzzy. Therefore, the fuzzy degree of a proposition can be measured by the distance between a proposition and its negation. The higher is the fuzzy degree of a criterion, the greater is the uncertainty of the criterion, and the smaller is the corresponding discount coefficient; conversely, the lower is the fuzzy degree of a criterion, the smaller is the uncertainty of the criterion, and the larger is the corresponding discount coefficient. Based on the negation of probability distribution, the fuzzy degree of the criterion is taken as the reference standard to calculate the discount coefficient of the criterion, and then the BPA of the criterion is generated and combined. In this way, the errors caused by the experts' subjective evaluation of each standard are corrected and the decision-making level is improved.
The main aim of this study is to provide a new way to solve the multi criteria decision-making problem by combining the negation of probability distribution and evidence fusion from the point of quantitative description of the fuzzy degree of criteria.
Theorem 2. The power set 2 Θ is defined as the set of all combinations of possible cases in the identification framework, that is, the set of all subsets of the identification framework Θ. Proposition A is a subset of the identification framework Θ, that is, the elements of the power set 2 Θ [69,70].
Theorem 3. BPA is the basic probability distribution function and m meets the following two conditions: m(∅) = 0 and ∑ A⊆Θ m(A) = 1. m(A) represents the precise trust degree to proposition A, which means that you do not know how to allocate this number when A = Ω [69,70].
The combination rule is to calculate the orthogonal sum of different probability distribution functions [69,70].

Negation of Probability Distribution
The negation of probability distribution [43] generally does not lead to the unique probability distribution, but generates a set of probability distributions that is regarded as consistent with the negation idea. Specially, based on the maximum entropy distribution of the weight related to each focus element, there is a unique negative implementation.

Proposed Method
In this section, we introduce a multi-criteria decision-making method based on negation of probability distribution. The specific flow chart is shown in Figure 1. By combining the D-S evidence theory with the negation of probability distribution, the fuzzy degree of the criterion is taken as the reference standard to calculate the discount coefficient of the criterion, which corrects the errors brought by the experts' subjective evaluation of each criterion and improves the decision making level. Problem statement: Let a set of m possible exclusive alternatives Θ = {A 1 , A 2 , · · · , A m } be the frame of discernment, C = {C 1 , C 2 , · · · , C n } be the set of n decision criteria, and DM = {DM 1 , DM 2 , · · · , DM t } be the set of t decision makers. A set of fuzzy ratings for A i (i = 1, 2, · · · , m) with respect to the criteria C j (j = 1, 2, · · · , n) given by the decision maker DM k (k = 1, 2, · · · , t) is denoted asx ijk , i = 1, 2, · · · , m; j = 1, 2, · · · , n; k = 1, 2, · · · , t, wherex ijk = (x ijk1 , x ijk2 , x ijk3 , x ijk4 ), and a set of fuzzy importance weights for C j (j = 1, 2, · · · , n) given by the decision maker DM k (k = 1, 2, · · · , t) is denoted asw jk , j = 1, 2, · · · , n; k = 1, 2, · · · , t, wherew jk = (w jk1 , w jk2 , w jk3 , w jk4 ). Consider this fuzzy MCDM problem: The best candidate should be selected from θ.
Step 1-1: Multiply fuzzy coefficientx ijk and fuzzy importance weightw jk to get weighted fuzzy coefficientx w ijk =x ijk ×w jk , where the superscript w is used to represent the weight of importance of different criteria. Due to different decision makers having different judgments on the importance degree of different criteria, by scalar multiplication, the weight factors (x ijk ) of the same criteria of the same decision-maker and the importance factors (w jk ) of the criteria are multiplied correspondingly, and the weighted weight factors (x w ijk ) of a decision-maker for a scheme under a certain criterion are obtained. Then, the weighted fuzzy coefficient matrixD k (k = 1, 2, . . . , t) is obtained: Step 1-2: The aggregated fuzzy valuex w ij of weighted fuzzy value and the aggregated decision matrixD are obtained by considering the evaluation of t decision-makers. Then, the aggregated fuzzy values are normalized and defuzzified, respectively. Then, the defuzzified weight decision matrix Def D is obtained. After another normalization, obtainDe f Then, the normalized defuzzified weight decision matrix is obtained: Step 2: Calculate the discount factor for each criterion.
Step 2-1: Since the column elements of the above matrix are obtained by normalization, , j = 1, 2, . . . n, each column conforms to the characteristics of probability distribution.
Through the negation formula, the negation weighted decision matrix NDe f (D) can be obtained.
Step 2-2: For each criterion C j , the Euclidean distance d j between the probability distribution and the negation is calculated.
Step 2-3: Normalize to get the discount coefficient U C j of each criterion.
Step 3: Generate BPAs and combine them.
Step 3-1: According to the following formula, BPA corresponding to each proposition A i is generated based on each criterion C j .
Step 3-2: Through (n−1) times orthogonal sum operation, BPAs of different criteria are combined with each other. m C = · · · m C 1 ⊕ m C 2 ⊕ · · · ⊕ m C n Step 3-3: According to the value of m C , the scheme A α with the largest m C is the best scheme, and the best scheme may not be unique.

Examples
In this section, the feasibility of the proposed method is verified by experiments.

Problem Statement
Problem statement: Consider the decision-making problem of supplier selection from Xiao [42] associated with a committee of three decision makers established by a company who give their anticipation and definition of the evaluation criteria for the final four candidate suppliers after a preliminary screening, where Θ = {A 1 , A 2 , A 3 , A 4 } is the frame of discernment consisting of four alternatives, DM = {DM 1 , DM 2 , DM 3 } is the set of decision makers, and C = {C 1 , C 2 , C 3 , C 4 , C 5 } is the set of criteria, which is considered to be the set of evidence. The criteria are defined as follows: C1 is the quality of products, C2 is the effort to establish cooperation, C3 is the technical level of each supplier, C4 is the delay on delivery of each supplier, and C5 is the price/cost.

Implementation Based on the Proposed Method
Step 1: Get the normalized defuzzified weight decision matrix.
Step 1-1: Generate the fuzzy values of the weighted supplier ratingsx w ijk . Then, the weighted fuzzy coefficient matrixD k is obtained, as shown in Table 3.  Step 1-2: By integrating evaluations from different decision makers, the aggregated fuzzy value of weighted fuzzy valuex w ij can be obtained, as shown in Table 4. Through the normalization and the defuzzification, the defuzzified weight decision matrix De f (D) can be obtained, as shown in Table 5. Then, through another normalization, the normalized defuzzified weight decision matrix De f (D) can be obtained, as shown in Table 6. Table 4. The normalized aggregated decision matrixD.   Step 2: Calculate the discount factor of each criterion.
Step 2-1: Through the negation formula, the negation weighted decision matrix NDe f (D) can be obtained, as shown in Table 7. Step 2-2: The Euclidean distance d j of each criterion is calculated by the difference between the weighted decision matrix and its negation matrix, as shown in Tables 8 and 9. Table 8. The difference between the weighted decision matrix and its negation matrix.  Table 9. The Euclidean distance d j .

Difference Value
0.0617 0.0214 0.0905 0.0277 0.0645 Step 2-3: Normalize to get the discount coefficient U C j of each criterion, as shown in Table 10. Step 3: Generate BPAs and combine them.
Step 3-1: According to the following formula, BPA corresponding to each proposition A i is generated based on each criterion C j , as shown in Table 11. Table 11. The BPAs of the propositions with respect to different criteria.
BPAs Step 3-2: Combine BPAs of different criteria C j each other, as shown in Table 12. Step 3-3: Sort the m C of different schemes A i in descending order, and select the best scheme A 4 .

Comparison and Discussion
We compare the proposed method with the related methods, i.e., EFMCDM [42], where the experimental results are shown in Table 13. Table 13. Comparison of the proposed method with EFMCDM.

Decision Method
Ranking Order Optimal Choice The proposed method The method proposed in this paper obtains the order of A 4 > A 1 > A 3 > A 2 and the best choice A 4 . The result is the same as EFMCDM method, and it can make a reasonable choice, which shows the feasibility and correctness of this method.
In addition, we compare the belief value of the uncertainty of the criteria obtained by the proposed method after evidence fusion with the mean belief value of the uncertainty of the criteria. The results are shown in Table 14. According to the data in Table 14, after evidence fusion, the belief value of the uncertainty decreased from 0.8000 to 0.3973. While reducing the complexity of the algorithm, to some extent, it still retains the advantages of EFMCDM method, that is, it can quantitatively describe and effectively reduce the uncertainty caused by subjective cognition.

Sensitivity Analysis
To study the robustness and stability of the proposed method, it is necessary to analyze the sensitivity of the subjective weight of the criteria. Since the importance evaluation of the criteria is determined by the decision-maker subjectively, there must be human errors caused by the subjective evaluation. Therefore, six groups of importance weights of the criteria are randomly selected, as shown in Table 15. The belief values corresponding to the alternative schemes are calculated, and the best scheme is selected. Table 15. The generated importance weights of the criteria.
Sets According to six groups of importance weights of the criteria, the belief values of each alternative are calculated, as shown in Table 16 and Figure 2.  Except that the alternative ranking of Set 4 is A 4 > A 3 > A 1 > A 2 , the alternative ranking calculated by other groups is A 4 > A 1 > A 3 > A 2 , indicating that the change of belief value of alternative is basically stable against the variation in importance weights of the criteria. The criteria ranking corresponding to Set 4 is C 4 > C 5 > C 1 > C 2 > C 3 according to the relative importance, which results in the lowest evaluation weighting coefficient based on C 3 criterion and affects the final A 1 and A 3 ranking results, which shows that the method is sensitive to the variation in subjective weight. Because the proposed method is affected by some subjective weight changes, it can result in human errors in the decision results. Therefore, the proposed method is suitable for a decision-making environment with less human error.
In addition, as shown in Table 17, no matter how the relative importance of the criteria changes, the best scheme is always A 4 , which confirms the effectiveness of the method, and shows that the proposed method is effective for the correction of subjective errors.

Conclusions
This paper presents a weights-determining method in MCDM based on negation of probability distribution under uncertain environment. The main contribution of this paper is the combination of probability distribution negation and evidence fusion, which provides a new way to solve MCDM problems. While inheriting the advantage of EFMCDM in quantitative description of the uncertainty, through quantitative evaluation of the fuzzy degree of the criteria, to a certain extent, the error of experts' subjective evaluation of each criterion is corrected to improve the decision-making level.
In the future work, the proposed method presents a new improvement scheme for the multi-attribute decision-making problem, which can be widely used in all aspects of life, e.g., supplier selection. In addition, on the premise of ensuring the correctness of the best scheme, we intend to further eliminate the influence of human subjective error on the order of alternatives.

Conflicts of Interest:
The authors declare no conflict of interest.

Abbreviations
The following abbreviations are used in this manuscript: