Approach Methodology for Comprehensive Assessing the Public Passenger Transport Timetable Performances at a Regional Scale

: The paper is focused on the issue of assessing the quality of transport connectivity on a predesignated transport network in regular public passenger transport at a regional scale. Comprehensively, using the deﬁned key qualitative indicators, it assesses the performance of passenger transport timetables, in both ways of ex ante, as well as ex post. Existing methodologies in a given issue have only dealt with a partial assessment of the transport connectivity quality on speciﬁc transport network. However, unlike them, the objective of this manuscript was to propose a new uniﬁed methodology to assess the passenger transport timetables in terms of transport connectivity, and subsequently to complexly evaluate the whole predesignated regional transport network from a qualitative point of view. In this paper, the proposed methodology is demonstrated on a particular regional transport network, speciﬁcally an existing railway network in the Slovak Republic, whereby the data related to regional passenger transport timetables for a certain day is an input factor. The purpose of this study was to design and verify a draft methodological procedure to assess the quality of transport connectivity on a certain transport network, thus moving towards more e ﬀ ective evaluation of integrated transport systems. Its practical applicability consists in comparison of existing and proposed timetables, which is considered one of the crucial factors in terms of public passenger transport quality.


Introduction
The role of the European Union's (EU's) transport system is to provide a high degree of mobility, while increasing its performance in terms of speed, comfort, and safety. At present, achieving a uniform, sustainable, integrated, and efficient transport system requires creation of transfer links and interconnections across all modes of transport. The availability of destinations and the frequency of connections are the most important criteria in terms of passengers' interest in public transport [1][2][3].
The transport infrastructure function is to comprehensively serve the state territory or selected geographic agglomeration. Transport infrastructure is one of the basic conditions for the functioning the national economy. It can be stated that, from a spatial point of view, the transport network intended to serve as regular passenger transport is rather well developed and sufficiently covers transport areas of public interest. Compared to the EU average, however, the quality of examined transport network

Literature Review
The issue of public passenger transport quality assessment, to a certain extent, has already been addressed in several publications [1][2][3][4][5][6][7][8][9][10][11]. Nevertheless, results of these studies point only to partial evaluations of the quality of individual transport sections, while there is lack of reference and link to the individual timetable evaluations as a whole. Some research studies are particularly focused on an effect of the transport network utilization on optimization algorithms [1][2][3]12], whilst others deal with periodic transport modes on transport networks and their optimization [6,7]. For instance, authors in [13,14] present a particular transport network, specifically railway transport infrastructure in regard to the quality evaluation. The application of empirical models in transport and traffic planning in terms of travel time impact on transport operation is addressed in publications [15][16][17], and the empirical studies [18,19] highlight the identification of key qualitative factors for the selected city. Relations between transport infrastructure and economic growth in India, and China's foreign capital issues are addressed in articles [8,20,21]. Temporal and spatial accuracy represents one of the most important attributes regarding the quality of public passenger transport. Time deviations from the planned schedule diminish the level of transport service provided, which is examined in research study in detail [22].
Nevertheless, the presented paper is based on the combination of several publications dealing with dynamic models of the transport service quality [23], as well as approaches to measure and evaluate the quality of services in passenger transport [24,25]. The authors have concluded that the assessing the transport connectivity is to be considered as a whole, resulting in a synergistic effect when evaluating the identified quality indicators. Therefore, it is necessary to come out on the quality standards of services provided in regional railway passenger transport [26][27][28]. An important aspect of this research study is also to rapidly relocate (move) among tariff points on the predesignated network; the following publications point to these qualitative attributes, whereby the effect of high-speed rails is addressed in [5,29], as well as in [30][31][32]. In publication [33], the methodology for examining the connectivity on a transport infrastructure, where the transport policy is applied to the specific case study regarding the high-speed rail, is the research topic in regard to transport infrastructure. In [34,35], a stability simulation analysis for intercity railways is presented, and in [36][37][38], new technologies for intelligent transport systems improving the transport connection quality on a certain network are described and analyzed.
This study is also focused on time-based synchronization in transfer points, as discussed in transport related studies in publications as well [39][40][41][42][43][44], where the effects of travel times on cost savings in terms of commuting on public transport routes and passengers' behavior under regional conditions in Eastern Europe are sequentially being discussed. Support for individual transport mode connections to the railway network is examined in [45,46], and a variety of case studies to increase the share of railway transport within the limitations of existing railway network are addressed in [47][48][49][50][51].
As for this manuscript, applying the methodology itself to the case study is performed using a particular web application [52], on a specific day and utilizing the search engine for train connections [53]. Implementing the regular timetable into particular studies is also, for example, carried out in publications [54][55][56], which needs to be assessed on the basis of the transport connectivity accessibility, as referred to in several transport research procedures [57][58][59].
Examples of economic impacts and financial compensation in regard to regional passenger transport are discussed in publications [60,61]; pricing, as well as optimal taxation of transport networks in [62]; and integration of tariffs in public transport is addressed in literature sources as follows [63,64]. Research in terms of specific transport networks and options for their assessment within regional conditions is executed in detail in [19,65]. In the context of transport service quality assessment, as well as internalization of external costs, the articles, as follows, have been published [66][67][68][69].

Materials and Methods Used to Compile Final Methodology
As a consequence of increasing competition in passenger transport [2], it is necessary to look for ways of making public transport more attractive to passengers. The leading indicator is the overall time spent traveling between two points. Reduction of the overall travel time (hereinafter as start-stop achieving time) can be achieved by optimum coordination of the participating transport subsystems. In this case, public regional passenger transport modes having assigned a timetable are considered the participating transport subsystems. This requires an integrated offer [25], which means that timetables, driving times and transfer times are coordinated in order to minimize the start-stop achieving time between two points on a given transport network.
The superstructure for regular services is represented by the Integrated Public Transport Timetable (IPTT) [26]. This timetable not only provides an overview of regular services, but also of network interconnectivity in terms of individual lines operating during a particular period and transfer times at selected locations. The general aim is to minimize a passenger's start-stop achieving time from point A to B. This kind of service provision requires high precision planning and also needs to take into consideration marginal condition. Essential requirements are also imposed on the amount of marginal time (see below) between two subsequent hubs where two-way transfers can take place. Applying marginal times enables a combination of appropriate measures to be implemented in regard to infrastructure, vehicles and, last but not least, connections [27].
The basic principle of the IPTT underpins the regular timetable for the superordinate transport network [24]. Optimal transfer conditions are achieved when all means of transport intercept during the same time period at a given transfer hub [28]. During this time period, it is necessary to provide passengers with supplementary means of transport at the transfer point so that they can travel onwards to particular transfer hubs within the transport area at minimum cost. Analogically, passengers may also travel in the opposite direction [27].
The timetable that is drawn up of the connections at a transfer hub within a given transport area is called the 'transfer tree' [28]. The timetable indicates the intervals for transfers, i.e., marginal times at the transfer hub. The situation as represented by a transfer tree is often reproduced after the expiration of a particular period of time [25,27].
Connections in the opposite direction for a particular line should intercept due to the symmetry of the timetables [16], whereby time-distances are equal to half the period. As a transfer hub is situated at a time-distance equal to the integer multiple of half the period, the connections in the opposite direction, therefore, intercept at these transfer hubs [27].
The time-distance between the symmetrical transfer trees of two sequential transfer hubs is called 'marginal time' [24]. A one-hour period amounts to marginal times of 30, 60, and 90 min, etc. [18].
In a given systematized transport network [26], it should be possible to go from one point to another in the suggested way without a substantial loss of time due to waiting for a connection. This must also apply vice-versa, thereby creating transfer tree symmetry. As a result, the time needed for the return journey is equal to the integer multiple of the period [28].
For these reasons, timetables of this kind between hubs must be extremely precise [25]. Within this context, it is not necessary to take into consideration the maximum value for line speed because the transport time (see below), and therefore line speed, depends on these timetables. This way of systematizing timetables enables railway transport to become part of an integrated base for comprehensive systematized integrated timetables [27]. By implementing the suggested requirements, the quality of transport network connectivity considerably increases [15].
During the addressing this issue, it was necessary to examine certain methods of Operations Research that are inevitably related to the forming and optimizing the transport network itself. In practice, there are a number of methods regarding the topics of transport network optimization, e.g., the nearest neighbor method, Chinese postman method (route inspection problem), traveling salesman problem, etc.

Developing Methodology for Assessing Network Connectivity
Any new methodology for the comprehensive assessment of the quality of network connectivity should be based on predetermined and well-defined steps [15,23]. The interconnection of individual indicators must enable the assessment of connectivity [12], and therefore the quality of transport, on equal terms [18]. This implies that all connections within a selected network must be taken into consideration [24,29]. The assessment procedure itself includes individual steps as follows: 1. Determining a transport network; 2. Identifying a set of transport connections; 3. Defining the relevant tariff points on a defined transport network; 4. Selecting search engines for transport connections; 5. Specifying the assessment qualitative indicators; 6. Assessment of individual connections; 7. Assessment of average indicators within a specific route; and 8. Comprehensive assessment of a particular indicator within a transport network.
The suggested methodology is also vividly presented in the following flowchart (see Figure 1). Defining the relevant tariff points on a defined transport network; 4. Selecting search engines for transport connections; 5. Specifying the assessment qualitative indicators; 6. Assessment of individual connections; 7. Assessment of average indicators within a specific route; and 8. Comprehensive assessment of a particular indicator within a transport network. The suggested methodology is also vividly presented in the following flowchart (see Figure 1).

Figure 1.
Flowchart for assessing the quality of transport network connectivity.

Determining a Transport Network
In this step, the passenger transport network (railway, road, air, water, integrated transport systems, etc.) is selected which will be the subject of the quality assessment. The specific choice may be defined in terms of mode of transport, operator, transport network or other criteria, and possibly also including ITS lines [30,31].

Determining a Transport Network
In this step, the passenger transport network (railway, road, air, water, integrated transport systems, etc.) is selected which will be the subject of the quality assessment. The specific choice may be defined in terms of mode of transport, operator, transport network or other criteria, and possibly also including ITS lines [30,31].

Identifying a Set of Transport Connections
In this step, specific connections should be selected. The choice depends either on the particular operator who provides transport services on the selected network [32], or on the kind of transport. Alternatively, all available connections as provided by all the operators are analyzed [33].

Defining the Relevant Tariff Points on the Defined Transport Network
Relevant qualitative indicators that serve as performance indicators for a particular connection between tariff points should be included in a comprehensive assessment of the connections incorporated in a timetable [34,35].
The minimum quality standards for the comprehensive assessment of an individual connection within a selected transport network (within a geographical area) are determined on the basis of the following indicators [15,[36][37][38][39]: average speed until the final stop; and • average waiting time.
For a comprehensive assessment, the quality of the connections at all tariff points within the selected transport network should be analyzed [15].
Alternatively, a set of tariff points may be selected for the quality assessment which are representative for the selected transport network as a whole [40].

Selecting Search Engines for Transport Connections
In this step, a search engine for connections needs to be selected according to input criteria [41]. Manual searching in timetables is the primary search method. However, websites, applications to search the transport connections, or offline mobile applications are also currently used for this purpose [52,53]. The individual parameters for searching for suitable connections (i.e., setting the date of departure, time of departure, maximum number of transfers, etc.) must be set correctly [43][44][45].

Specifying the Assessment Qualitative Indicators
Under the proposed methodology, the following indicators are used to assess the quality of the connections on a particular route [69]: Number of connections N s for the assessed day includes both direct lines and transfer lines. This indicates the number of alternatives divided over time that passengers have to travel from point A to B. The higher the number of transport connections between the selected locations (tariff points) A and B exist, the better the choice by the customer arises, and thus the greater potential of meeting the customer's expectations occurs. As a rule, the need of a passenger to move from point A to point B arises at different time sequences throughout the day, however it is the most numerous in the early, as well as late afternoon rush hours. The necessary number of peak-to-peak (rush hour) connections must meet transportation requirements of passengers and, in particular, take into account the transport travel frequency for passengers. Average waiting time W i refers to the amount of time spent by passengers waiting for a particular connection at the place of departure, or starting point. In regard to average waiting time of a passenger, there are two cases. First, a case when a passenger arrives at the point of departure just after the vehicle (train) departure, so he misses the transport connection, and thus is forced to wait for the next connection. The opposite case is when a passenger arrives at the point of departure just before the vehicle (train) departure, and is not forced to wait for the next connection. It is defined as half the time between the departure of two sequential connections: where: T odXi time of departure of the assessed connection from a tariffed starting point; and T odXi+1 time of departure of the following connection from a tariffed starting point. Connection distance L i refers to the distance traveled in kilometers (mostly tariff) by the mode of transport used for a particular connection. This does not always mean that the shortest possible route for the connection is used. As a result, this criterion, together with that of transport time, is classified as less important. Kind and number of modes of transport that comprise a connection. This factor defines the quality of transport service connectivity. Transport time T pi is calculated from the moment a passenger departs from their first starting point on the route to the moment of arrival at the final destination (tariff point). It is calculated as follows: where: W i average waiting time between two successive connections [h]; and T pi transport time [h]. Travel speed V Pi is calculated as the ratio of the traveled distance to the transport time.
where: L i traveled distance of the connection [km]; and T Pi transport time [h]. Start-stop achieving speed V Di is calculated as the ratio of the traveled distance to the start-stop achieving time.
where: L i traveled distance of the connection [km]; and T Di start-stop achieving time [h].

Assessment of Individual Connections
In order for the devised methodology to be applied successfully, more ways of assessing the quality of individual connections in a passenger transport network need to be considered [14]. For this research study, the quality of a connection was assessed according to the following [18,47]: After processing the assessment of the connectivity of one transport route, particular routes between tariff points on the transport network should be assessed [12]. This requires the careful selection of tariff points [48].

Assessment of Average Indicators within a Specific Route
During the assessments of the connections on a route, selected indicators are translated into average values [49]. This is done for the purposes of conducting the final comprehensive quality assessment of the whole route within the selected transport network [12].
For each route, average criterion values for all the assessed connections within a selected transport network must be calculated, i.e., average number of transfers (ø N p ); average transfer time (ø T w ); average start-stop achieving time (ø T d ); average travel speed (ø V P ); and average start-stop achieving speed (ø V D ) [69].

Comprehensive Assessment of a Particular Indicator Within a Transport Network
All the assessed routes within the network can then be evaluated on the basis of either the monitored indicators [17], or the weighted arithmetic mean of the number of passengers. As a result, the quality of a connection and that of the timetable for a selected transport network can be evaluated [12].
After determining the average values for all the monitored indicators, the average number of transfers for the whole transport network can be calculated. For the assessment of the quality of transport network´s connectivity, the following aspects should be taken into consideration: Arithmetic mean Average number of transfers, thereby taking into account the actual connections in the timetable: where: ØN ps average number of transfers in the whole transport network; ∅N p total of average transfers of i-th route on the examined route; and n number of examined routes in the network.
Average start-stop achieving time: where: ØT ds average start-stop achieving time for the whole transport network; ∅T p sum of average transport time of i-th route on the examined route; and n number of examined routes in the network.
Average travel speed: where: ∅ V Ps average travel speed across the whole transport network; ∅V P total of average speeds of i-th route during the test period; and n number of examined routes in the network.
Average start-stop achieving speed: where: ∅ V Ds average start-stop achieving speed across the whole transport network; ∅V p total of average speeds of i-th route within the examined period; and n number of examined routes in the network.

Average start-stop achieving speed using weighted arithmetic mean of the number of passengers
In this case, the start-stop achieving speed is regarded as the most relevant indicator for assessing the quality of the selected transport network´s connectivity. In order to make the quality assessment of the network more objective, the balance of the number of passengers between individual tariff points is used. where: ∅V D1 average start-stop achieving speed for the 1st examined route; n os1 number of transported passengers on the 1st route during the examined period; ∅V D2 average start-stop achieving speed for the 2nd examined route; n os2 number of transported passengers on the 2nd route during the examined period; ∅V Dn average start-stop achieving speed for the i-th examined route; n osn number of transported passengers on the i-th route during the examined period; and n os total of number of transported passengers.

Obtained Results: Application of a Case Study
The following example illustrates the use of the developed methodology for assessing the quality of a selected transport network´s connectivity.

Step 1-Selection of a transport network
The case study focuses on the ŽSR (Railways of the Slovak Republic) rail network and covers all carriers that provide railway services within this network on a particular day.

Step 2-Selection of a set of connections
The selected set of connections includes the county towns of self-governing regions, district towns with ŽSR or a stop, railway hubs, end-to-end route points, junctions and turns on the route, route sections, and centers of tourism.

Step 3-Selection of relevant tariff points within the transport network
In total, 61 tariff points within the ŽSR rail network were examined. According to the methodology, county and district towns were selected that have populations of over 20,000 inhabitants; after that, railway hubs and stations subject to criteria determined by railway geography; and, subsequently, center of tourism, all subject to the presence of at least one tariff point [58,63].
In Figure 2, the tariff points for the selected network are marked in red. The selected date was a working day, namely, Thursday, 14 April 2017, with the assessment conducted on the basis of the train timetable of the Slovak Republic 2016/2017 [53]. All connections between all the tariff points included in the 2016-2017 timetable were assessed. This involved the assessment of 3721 routes and all connections over a 24-h period. Step

4-Selection of a search engine for connections
Internet searches for all the connections were conducted via www.cp.sk [52] and search engine of timetables in Slovakia ELIS [53].
Step 5-Assessment of an individual connection Table 1 provides a good example of the assessment of a selected route between two points within the ŽSR rail network [52,53]. The data presented is for the Žilina-Bardejov route. In total, 10 connections were examined over the predetermined 24-h period. According to the 'transport time' criterion [64], number 6, which departs from Žilina at 11:20 am and arrives in Bardejov at 3:31 pm, can be regarded as the best connection. The journey of 288 km is covered in 4 h and 20 min with an average waiting time of 48 min in Žilina for this connection. This connection required two transfers, one from an intercity train to a local train, and the second between two local trains (Os) or train SC (Super City) and Os [45]. The average transfer time between trains was 10 min, which is highly satisfactory when waiting for a connecting passenger train [47]. The qualitative indicators regarding the transport connection are as follows [24,69]  All connections between all the tariff points included in the 2016-2017 timetable were assessed. This involved the assessment of 3721 routes and all connections over a 24-h period.

Step 4-Selection of a search engine for connections
Internet searches for all the connections were conducted via www.cp.sk [52] and search engine of timetables in Slovakia ELIS [53].
Step 5-Assessment of an individual connection Table 1 provides a good example of the assessment of a selected route between two points within the ŽSR rail network [52,53]. The data presented is for the Žilina-Bardejov route. In total, 10 connections were examined over the predetermined 24-h period. According to the 'transport time' criterion [64], number 6, which departs from Žilina at 11:20 am and arrives in Bardejov at 3:31 pm, can be regarded as the best connection. The journey of 288 km is covered in 4 h and 20 min with an average waiting time of 48 min in Žilina for this connection. This connection required two transfers, one from an intercity train to a local train, and the second between two local trains (Os) or train SC (Super City) and Os [45]. The average transfer time between trains was 10 min, which is highly satisfactory when waiting for a connecting passenger train [47]. The qualitative indicators regarding the transport connection are as follows [24,69]: start-stop achieving time T d6 = 4:50; travel speed V P6 = 68.84 km.h −1 ; and start-stop achieving speed V D6 = 58.88 km.h −1 .
Step 6-Assessment of all connections on the route Further assessment of the entire transport network requires the determination of the average indicators for each route. According to the proposed methodology, the values of the indicators for the Žilina-Bardejov route are as follows: average number of transfers øN p = 1.9; minimum average transfer time øT w = 46; average start-stop achieving time øT d = 6:20 h; travel speed øV P = 58.70 km.h −1 ; and start-stop achieving speed øV D = 47.83 km.h −1 .
Step 7-Assessment of connections within the selected network All routes on the network and all the connections between the selected points within the ŽSR rail network need to be subsequently assessed in the same way. This amounted to the testing of all existing connections on 3721 routes during the predetermined 24-h period. Absolute numbers of transfers were identified for each existing connection, after which an average number was determined for each examined route. After identifying all the average transfers, an average number of transfers for the whole transport network were calculated on the basis of Equation (7).
The number of transfers for the whole network was determined to be 2.10; this indicator is very important in regard to the number of direct connections within the network. The start-stop achieving time for the transport network is also regarded as a qualitative indicator for the transport process. After determining all the average start-stop achieving time, the average start-stop achieving time for the whole network was calculated on the basis of Equation (8).
∅T ds = ∅T pr n = 25022.35 3721 = 6.72 hours, The average start-stop achieving time for the whole network was determined to be 6.72 h; this indicator is very important in terms of available time at individual tariff points in the network.
The travel speed across the network is regarded as next indicator for the transport process. After determining all the average travel speeds, the average travel speed across the whole network was calculated on the basis of Equation (9).
The average travel speed across the whole network was determined to be 45.30 km.h −1 .
After determining all the average start-stop achieving speed, the average start-stop achieving speed across the whole network was calculated on the basis of Equation (10).
The average start-stop achieving speed (correct according to the original text) across the whole network was determined to be 35.22 km.h −1 .
The quality of the transport network´s connectivity, as defined by the flows of passengers between the monitored points of the network during the predetermined 24-h period, was subsequently examined. The flows (numbers) of passengers were subjected to the requirements set out in this article. Table 2 presents the product of the start-stop achieving speeds and the numbers of passengers traveling between the tariff points of the selected transport network. After totaling these results, the arithmetic mean was determined according to the number of passengers by applying Equation (11).
In order to assess the quality of the transport network´s connectivity on the basis of the start-stop achieving speed, flows of passengers were used to objectivize the assessment. The weighted arithmetic mean of the number of passengers was used for the calculation (and the value of start-stop achieving speed across the whole network weighed by number of passengers was calculated): The results are presented below (Table 2). After identifying all the average start-stop achieving speed and passenger flows for the individual routes of the selected transport network, the start-stop achieving speed was determined to be 38.93 km.h −1 .

Discussion
In the case study elaborated in previous Chapter, as an example, the evaluation of one particular railway transport section (Žilina-Bardejov, located in the Slovak Republic) out of 3721 train lines was selected. The following results were calculated on the given transport route: The same principle was applied across the whole transport network, and by implementing the same methodological procedure, the remaining 3720 transport routes were examined. After applying this procedure throughout the network, the following results were obtained: Thus, after identifying and calculating the individual indicators when taking into account passenger flows, start-stop achieving speed across the whole network was determined at 38.93 km.h −1 . Based on this value, it is possible to compare the upcoming timetables and objectify the quality of timetables based on the proposed procedures.
As mentioned, the major objective of the manuscript was to propose a universal and comprehensive methodology to assess the quality of transport connectivity on a predesignated transport network within regular passenger transport at a regional scale, specifically when using the public passenger transport timetable performance data. The main benefit of the performed research study lies in a draft of unified methodology that may be applicable on any regional transport network and on any regular public passenger transport mode, as well as integrated transport systems. Other benefits may include, e.g., specification of requirements of the public passenger transport orderer for better transport connectivity in timetables based on the proposed assessment qualitative indicators; and particular support of EU transport policy objectives in terms of public passenger transport with an emphasis on quantification of qualitative indicators assessing the relocation process on a transport network.
The proposed methodology can be used to compare parameters and indicators for different timetable variants, in both methods of ex ante, as well as ex post.
The approach procedure is directly applicable to the following modes in regular public passenger transport: railway passenger transport, bus passenger transport, air passenger transport, and integrated transport systems, due to their regularity in the context of passengers' carriage. The methodology cannot be applied to private car transport nor passenger transport, which do not have assigned a timetable.

Conclusions
As for the area of assessing the transport connectivity quality on a transport network, a number of standards, regulations and directives exist. They are implemented in national legislation; however, the quality of transport connectivity and availability is perceived subjectively by each passenger or potential passenger. No unified methodology for comprehensive assessing the quality of transport connectivity within regular passenger transport on a predesignated transport network at a regional scale has been designed yet. The stated suggestions and solutions to address the issue of assessing the quality of transport connectivity contribute to enforce the EU transport policy intentions and objectives, i.e., promoting the population mobility using more environmentally-friendly modes of transport.
Sequentially, according to the proposed approach methodology, the specific regional railway network was identified, as well as more important economic nodes and relevant tariff points on this railway network were specified. Subsequently, using the ELIS search engine of timetables and by analyzing individual transport sections between two tariff points, on a selected day and a given section, the calculated average values of each determined indicator per route were evaluated.
These indicators are as follows: In the draft comprehensive methodology, a total of 3721 transport sections (routes) were processed, and in each section, all connections were taken into account for individual calculations. To objectify the outcomes depending on the start-stop achieving speed, passenger flows (number of passengers) were utilized. This indicator can be used to compare certain values among individual timetables in railway passenger transport, either ex post or ex ante.
As mentioned, the research study addressed is applied to assess the quality of transport connectivity at existing regional railway network in a given transport territory (located in the Slovak Republic); nevertheless, the proposed methodological procedure is applicable to all modes of regular public passenger transport and integrated transport systems. It is intended to serve as a fundamental for assessing, analyzing, or comparing the compiled public passenger transport timetables on a particular transport network when using specified assessment qualitative indicators.
Following the aforementioned, the approach methodology may serve as a basis for multiple purposes for ministries, operators, and orderers (customers) within public passenger transport. It should be noted that the draft assessment procedure makes it possible to compare different timetable variants on a defined transport network.
The methodology presented is primarily based on an ideal situation, i.e., times in timetables are adhered to and there are no significant delays in individual transport connections. However, for future investigations, the criteria related to the transport connection delays may be taken into account, thereby to compare current (existing) timetables with real (including delays) timetables. Such comparisons could subsequently serve as an evaluation of compliance (ideal) or non-compliance (including delays) with timetables. In that case, the resulting monitored indicators would be changed, which could lead to optimization of timetables, thus minimizing transport connection delays for future time-periods. This could be considered another factor to assess the timetable reliability, thus helping to improve the quality of public passenger transport.