The 2023 MDPI Annual Report has
been released!
 
24 pages, 33760 KiB  
Article
Effect of the Axial Profile of a Ceramic Grinding Wheel on Selected Roughness Parameters of Shaped Surfaces Obtained in the Grinding Process with a Dual-Tool Grinding Head
by Piotr Jaskólski, Marzena Sutowska, Wojciech Zawadka, Winfried Malorny, Krzysztof Rokosz and Krzysztof Nadolny
Materials 2024, 17(10), 2434; https://doi.org/10.3390/ma17102434 (registering DOI) - 18 May 2024
Abstract
The use of CNC equipment that integrates several machining operations eliminates downtime due to changes in setup and clamping of workpieces in more than one machining device. A review of CNC equipment and tools known from the literature and from manufacturers’ offerings indicates [...] Read more.
The use of CNC equipment that integrates several machining operations eliminates downtime due to changes in setup and clamping of workpieces in more than one machining device. A review of CNC equipment and tools known from the literature and from manufacturers’ offerings indicates that new technical solutions are being developed to integrate two or more technological operations. However, these examples have numerous limitations and are mostly not suitable for machining surfaces with complex shapes. An example of such solutions is the use of a dual-tool grinding head, which integrates the process of rough grinding with a ceramic grinding wheel and finish grinding with a flexible grinding wheel. Unfortunately, it has the disadvantage of being limited by the angular shape of the ceramic grinding wheel, making it unable to adapt to the complex geometries of the shaped surfaces being ground. The need to overcome this limitation became the motivation for the research work described in this article. By means of experimental research, it was verified what effect the radial outline on the periphery of a ceramic grinding wheel realized by rough grinding would have on the surface roughness parameters obtained in the process of grinding shaped surfaces. For this purpose, grinding processes using a ceramic wheel with a conical and radial outline were compared. The result of the study was a summary of the surface roughness parameters Sa, St, Sq, Spk, Str, and Sds obtained after two-stage machining (rough and finish grinding). The obtained analysis results showed that changing the axial outline of the ceramic grinding wheel makes it possible to significantly expand the range of applications of the dual-tool head without negatively affecting the quality of the machined surface. Thus, such an improvement will make it possible to increase the applicability of the head by grinding shaped surfaces with a radial profile of curvature. Full article
(This article belongs to the Special Issue Obtaining and Characterization of New Materials, Volume V)
Show Figures

Figure 1

12 pages, 258 KiB  
Article
Aerobic Vaginal Microflora in Gestational and Non-Gestational Bitches (Canis lupus familiaris)
by Raul Alexandru Pop, Iosif Vasiu, Gabriele Meroni, Piera Anna Martino, Roman Dąbrowski, Asta Tvarijonaviciute and Iosif Nicodim Fiţ
Animals 2024, 14(10), 1501; https://doi.org/10.3390/ani14101501 (registering DOI) - 18 May 2024
Abstract
The vaginal tract comprises commensal microorganisms, which play an essential role in the health of the reproductive tract. Any dysbiosis in the vaginal microenvironment may lead to severe urinary tract infections or even infertility. This study aimed to evaluate the aerobic bacterial flora [...] Read more.
The vaginal tract comprises commensal microorganisms, which play an essential role in the health of the reproductive tract. Any dysbiosis in the vaginal microenvironment may lead to severe urinary tract infections or even infertility. This study aimed to evaluate the aerobic bacterial flora isolated from vaginal samples from 100 lactating bitches in the antepartum period (n = 3), postpartum period (n = 80), and with Lactatio sine graviditate (n = 17). Before vaginal swabs, all the bitches went through a gynecology consult, along with milk and blood sampling. Standard microbiological techniques were used for bacterial isolation. Among the 100 vaginal samples analyzed, 82% had a positive microbiological outcome, while 18% were negative. The microbiologic profile listed 17 different genera. The main isolated bacterial families were Micrococcaceae, Staphylococcaceae, Morganellaceae, Bacillaceae, and Rhizobiaceae. At the same time, strains like Agrobacterium radiobacter, Ochrobactrum anthropi, Chromobacterium violaceum, Burkholderia mallei, Bacillus pumllus, or Staphylococcus xylosus were isolated for the first time from the vaginal secretion of lactating bitches. The microbiological data demonstrates that lactating bitches’ vaginal discharge is heterogeneous and may be affected by coitus, sampling season, age, and reproductive status. Full article
(This article belongs to the Section Companion Animals)
25 pages, 17035 KiB  
Article
Constrained Iterative Adaptive Algorithm for the Detection and Localization of RFI Sources Based on the SMAP L-Band Microwave Radiometer
by Xinxin Wang, Xiang Wang, Lin Wang, Jianchao Fan and Enbo Wei
Remote Sens. 2024, 16(10), 1791; https://doi.org/10.3390/rs16101791 (registering DOI) - 18 May 2024
Abstract
The Soil Moisture Active Passive (SMAP) satellite carries an L-band microwave radiometer. This sensor can be used to observe global soil moisture (SM) and sea surface salinity (SSS) within the protected L-band spectrum (1400–1427 MHz). Owing to the complex effects of radio frequency [...] Read more.
The Soil Moisture Active Passive (SMAP) satellite carries an L-band microwave radiometer. This sensor can be used to observe global soil moisture (SM) and sea surface salinity (SSS) within the protected L-band spectrum (1400–1427 MHz). Owing to the complex effects of radio frequency interference (RFI), the SM and SSS data are missing or have low accuracy. In this paper, a constrained iterative adaptive algorithm for the detection, identification, and localization of RFI sources is designed, named MICA-BEID. The algorithm synthesizes antenna temperatures for the third and fourth Stokes parameters before RFI filtering, creating a new polarization parameter called WSPDA, designed to approximate the level of RFI interference on the L-band microwave radiometer. The algorithm then utilizes the WSPDA intensity and distribution density of RFI detection samples to enhance the identification and classification of RFI sources across various intensity levels. By utilizing statistical methods such as the probability density function (PDF) and the cumulative distribution function (CDF), the algorithm dynamically adjusts adaptive parameters, including the RFI detection threshold and the maximum effective radius of RFI sources. Through the application of multiple iterative clustering methods, the algorithm can adaptively detect and identify RFI sources at various satellite orbits and intensity levels. Through extensive comparative analysis with other localization results and known RFI sources, the MICA-BEID algorithm can achieve optimal localization accuracy of approximately 1.2 km. The localization of RFI sources provides important guidance for identifying and turning off illegal RFI sources. Moreover, the localization and long-time-series characteristic analysis of RFI sources that cannot be turned off is of significant value for simulating the spatial distribution characteristics of localized RFI source intensity in local areas. Full article
17 pages, 2597 KiB  
Review
Hepatitis C Virus E1E2 Structure, Diversity, and Implications for Vaccine Development
by Brian G. Pierce, Nathaniel Felbinger, Matthew Metcalf, Eric A. Toth, Gilad Ofek and Thomas R. Fuerst
Viruses 2024, 16(5), 803; https://doi.org/10.3390/v16050803 (registering DOI) - 18 May 2024
Abstract
Hepatitis C virus (HCV) is a major medical health burden and the leading cause of chronic liver disease and cancer worldwide. More than 58 million people are chronically infected with HCV, with 1.5 million new infections occurring each year. An effective HCV vaccine [...] Read more.
Hepatitis C virus (HCV) is a major medical health burden and the leading cause of chronic liver disease and cancer worldwide. More than 58 million people are chronically infected with HCV, with 1.5 million new infections occurring each year. An effective HCV vaccine is a major public health and medical need as recognized by the World Health Organization. However, due to the high variability of the virus and its ability to escape the immune response, HCV rapidly accumulates mutations, making vaccine development a formidable challenge. An effective vaccine must elicit broadly neutralizing antibodies (bnAbs) in a consistent fashion. After decades of studies from basic research through clinical development, the antigen of choice is considered the E1E2 envelope glycoprotein due to conserved, broadly neutralizing antigenic domains located in the constituent subunits of E1, E2, and the E1E2 heterodimeric complex itself. The challenge has been elicitation of robust humoral and cellular responses leading to broad virus neutralization due to the relatively low immunogenicity of this antigen. In view of this challenge, structure-based vaccine design approaches to stabilize key antigenic domains have been hampered due to the lack of E1E2 atomic-level resolution structures to guide them. Another challenge has been the development of a delivery platform in which a multivalent form of the antigen can be presented in order to elicit a more robust anti-HCV immune response. Recent nanoparticle vaccines are gaining prominence in the field due to their ability to facilitate a controlled multivalent presentation and trafficking to lymph nodes, where they can interact with both the cellular and humoral components of the immune system. This review focuses on recent advances in understanding the E1E2 heterodimeric structure to facilitate a rational design approach and the potential for development of a multivalent nanoparticle-based HCV E1E2 vaccine. Both aspects are considered important in the development of an effective HCV vaccine that can effectively address viral diversity and escape. Full article
(This article belongs to the Section Human Virology and Viral Diseases)
Show Figures

Figure 1

18 pages, 4055 KiB  
Article
Unveiling Key Factors Shaping Energy Storage Strategies for Sustainable Energy Communities
by José Andrés Palacios-Ferrer, Francisco J. Rey-Martínez, Christian A. Repenning-Bzdigian and Javier M. Rey-Hernández
Buildings 2024, 14(5), 1466; https://doi.org/10.3390/buildings14051466 (registering DOI) - 18 May 2024
Abstract
This research delves into a case study of a photovoltaic (PV) energy community, leveraging empirical data to explore the integration of renewable energy sources and storage solutions. By evaluating energy generation and consumption patterns within real-world energy communities (a nominal generation capacity of [...] Read more.
This research delves into a case study of a photovoltaic (PV) energy community, leveraging empirical data to explore the integration of renewable energy sources and storage solutions. By evaluating energy generation and consumption patterns within real-world energy communities (a nominal generation capacity of 33 kWn) in Gipuzkoa, Spain, from May 2022 to May 2023, this study comprehensively examines operational dynamics and performance metrics. This study highlights the critical role of energy consumption patterns in facilitating the integration of renewable energy sources and underscores the importance of proactive strategies to manage demand fluctuations effectively. Against the backdrop of rising energy costs and environmental concerns, renewable energies and storage solutions emerge as compelling alternatives, offering financial feasibility and environmental benefits within energy communities. This study emphasizes the necessity of research and development efforts to develop efficient energy storage technologies and the importance of economic incentives and collaborative initiatives to drive investments in renewable energy infrastructure. The analyzed results provide valuable insights into operational dynamics and performance metrics, further advancing our understanding of their transformative potential in achieving a sustainable energy future. Specifically, our study suggests that storage capacity should ideally support an average annual capacity of 23%, with fluctuations observed where this capacity may double or reduce to a minimum in certain months. Given the current market conditions, our findings indicate the necessity of significant public subsidies, amounting to no less than 67%, to facilitate the installation of storage infrastructure, especially in cases where initial investments are not covered by the energy community. Full article
(This article belongs to the Topic Trends and Prospects for Energy Communities in Europe)
Show Figures

Figure 1

13 pages, 534 KiB  
Article
A Novel Approach to Managing System-on-Chip Sub-Blocks Using a 16-Bit Real-Time Operating System
by Boisy Pitre and Martin Margala
Electronics 2024, 13(10), 1978; https://doi.org/10.3390/electronics13101978 (registering DOI) - 18 May 2024
Abstract
Embedded computers are ubiquitous in products across various industries, including the automotive and medical industries, and in consumer goods such as appliances and entertainment devices. These specialized computing systems utilize Systems on Chips (SoCs), devices that are made up of one or more [...] Read more.
Embedded computers are ubiquitous in products across various industries, including the automotive and medical industries, and in consumer goods such as appliances and entertainment devices. These specialized computing systems utilize Systems on Chips (SoCs), devices that are made up of one or more main microprocessor cores. SoCs are augmented with sub-blocks that perform dedicated tasks to support the system. Sub-blocks contain custom logic or small-footprint microprocessors, depending upon their complexity, and perform support functions such as clock generation, device testing, phase-locked loop synchronization and peripheral management for interfaces such as a Universal Serial Bus (USB) or Serial Peripheral Interface (SPI). SoC designers have traditionally obtained sub-blocks from commercial vendors. While these sub-blocks have well-defined interfaces, their internal implementations are opaque. Without visibility of the specifics of the implementation, SoC designers are limited to the degree to which they can optimize these off-the-shelf sub-blocks. The result is that power and area constraints are dictated by the design of a third-party vendor. This work introduces a novel idea: using an open-source, small, multitasking, real-time operating system inside an SoC sub-block to manage multiple processes, thereby conserving code space. This OS is TurbOS, a new operating system whose primary goal is to provide the highest performance using the least amount of space. It is written in the assembly language of a new pipelined 16-bit microprocessor developed at the University of Florida, the Turbo9. TurbOS is derived from and incorporates the design benefits of an existing operating system called NitrOS-9, and reduces the code size from its progenitor by nearly 20%. Furthermore, it is over 80% smaller than the popular FreeRTOS operating system. TurbOS delivers a rich feature set for managing memory and process resources that are useful in SoC sub-block applications in an extremely small footprint of only 3 kilobytes. Full article
(This article belongs to the Special Issue Progress and Future Development of Real-Time Systems on Chip)
Show Figures

Figure 1

15 pages, 943 KiB  
Article
Pole Dancing-Specific Muscle Strength: Development and Reliability of a Novel Assessment Protocol
by Despoina Ignatoglou, Achilleas Paliouras, Eleftherios Paraskevopoulos, Nikolaos Strimpakos, Paraskevi Bilika, Maria Papandreou and Eleni Kapreli
Methods Protoc. 2024, 7(3), 44; https://doi.org/10.3390/mps7030044 (registering DOI) - 18 May 2024
Abstract
Background: Pole dancing is a physically demanding sport that combines dance and acrobatic movements on a vertical pole. Despite its highly growing popularity, there is currently limited research in the field. The aim of this study was to create and evaluate a strength [...] Read more.
Background: Pole dancing is a physically demanding sport that combines dance and acrobatic movements on a vertical pole. Despite its highly growing popularity, there is currently limited research in the field. The aim of this study was to create and evaluate a strength assessment protocol for athletes in pole dancing, with a specific focus on functional positions on the pole. Methods: Thirty-two female pole dancing athletes participated in this study. Maximal voluntary isometric contractions (MVIC) were measured at three different sport-specific positions on the pole (shoulder abduction and adduction, and hip adduction), on two separate days (test and re-test) with a five to seven day interval between them. A hand-held dynamometer (Activ5- Activbody) stabilized on the pole was used for this study. Results: The intra-session reliability was good to excellent for all sports-specific positions and for both sides of the body, across all different movements (ICC = 0.837–0.960, SEM = 5.02Kg-2.24Kg, and SDD = 27.46%-14.92%). Slightly better results were found regarding inter-session reliability (ICC = 0.927–0.970, SEM = 3.72Kg-1.97Kg, and SDD = 22.86%-15.19%). There was not a statistically significant difference between the MVICs between the left and right or dominant and non-dominant side in shoulder abduction (p = 0.105) and hip adduction (p = 0.282), in contrast to shoulder adduction (p = 0.00). Conclusion: The strength assessment protocol developed in the current study has proven to be a reliable and functional tool, with the potential for utilization in clinical practice as part of objective strength testing. Further studies are needed in order to expand the protocol to other muscle groups and positions and to generalize the results in all pole dancing populations such as male athletes. Full article
(This article belongs to the Special Issue Methods on Sport Biomechanics)
19 pages, 20483 KiB  
Article
Subcellular Feature-Based Classification of α and β Cells Using Soft X-ray Tomography
by Aneesh Deshmukh, Kevin Chang, Janielle Cuala, Bieke Vanslembrouck, Senta Georgia, Valentina Loconte and Kate L. White
Cells 2024, 13(10), 869; https://doi.org/10.3390/cells13100869 (registering DOI) - 18 May 2024
Abstract
The dysfunction of α and β cells in pancreatic islets can lead to diabetes. Many questions remain on the subcellular organization of islet cells during the progression of disease. Existing three-dimensional cellular mapping approaches face challenges such as time-intensive sample sectioning and subjective [...] Read more.
The dysfunction of α and β cells in pancreatic islets can lead to diabetes. Many questions remain on the subcellular organization of islet cells during the progression of disease. Existing three-dimensional cellular mapping approaches face challenges such as time-intensive sample sectioning and subjective cellular identification. To address these challenges, we have developed a subcellular feature-based classification approach, which allows us to identify α and β cells and quantify their subcellular structural characteristics using soft X-ray tomography (SXT). We observed significant differences in whole-cell morphological and organelle statistics between the two cell types. Additionally, we characterize subtle biophysical differences between individual insulin and glucagon vesicles by analyzing vesicle size and molecular density distributions, which were not previously possible using other methods. These sub-vesicular parameters enable us to predict cell types systematically using supervised machine learning. We also visualize distinct vesicle and cell subtypes using Uniform Manifold Approximation and Projection (UMAP) embeddings, which provides us with an innovative approach to explore structural heterogeneity in islet cells. This methodology presents an innovative approach for tracking biologically meaningful heterogeneity in cells that can be applied to any cellular system. Full article
(This article belongs to the Special Issue Advanced Technology for Cellular Imaging)
Show Figures

Figure 1

21 pages, 2864 KiB  
Article
The Rise of the Superstars: Uncovering the Composition Effect of International Trade that Cements the Dominant Position of Big Businesses
by Chara Vavoura
Mathematics 2024, 12(10), 1576; https://doi.org/10.3390/math12101576 (registering DOI) - 18 May 2024
Abstract
International markets are extremely polarised, with a few big superstar businesses operating alongside numerous small competitors, and globalisation has been highlighted as a powerful force behind the superstars’ increasingly dominant presence. The empirical literature has established that superstars are more efficient compared to [...] Read more.
International markets are extremely polarised, with a few big superstar businesses operating alongside numerous small competitors, and globalisation has been highlighted as a powerful force behind the superstars’ increasingly dominant presence. The empirical literature has established that superstars are more efficient compared to their smaller counterparts, and, unlike them, they exhibit strategic behaviour. Building on this evidence, we develop a model to examine how an initial productivity advantage allows a select few firms to expand, via innovation, to the extent that it becomes optimal to adopt strategic behaviour, and show how polarised markets emerge endogenously as the unique subgame perfect equilibrium in pure strategies. We then introduce international trade and show that, in polarised markets, trade liberalisation puts into motion a novel composition effect, reallocating market share from smaller to larger rivals and raising large firms’ profits. This effect suppresses the pro-competitive welfare gains from trade and cements the dominant position of big businesses, who come out as the big winners of globalisation. We find that, although trade increases welfare, by reducing average markup and markup heterogeneity, in the presence of a handful of large powerful firms, welfare gains are severely diminished, and subsidising smaller enterprises may turn out to be welfare-enhancing. Full article
(This article belongs to the Special Issue Mathematical Economics and Its Applications)
27 pages, 1655 KiB  
Article
Exploring the Evolution Mechanisms of Social Risks Associated with Urban Renewal from the Perspective of Stakeholders
by Hong Xie, Lei Zhang, Peng Cui, Jingfeng Yuan and Qiming Li
Buildings 2024, 14(5), 1470; https://doi.org/10.3390/buildings14051470 (registering DOI) - 18 May 2024
Abstract
The urban renewal (UR) process involves various stakeholders and related activities, and the various risks arising from this endeavor can affect these stakeholders. Additionally, the impact of adverse factors such as policy discontinuity and inequitable distribution of benefits among stakeholders can easily result [...] Read more.
The urban renewal (UR) process involves various stakeholders and related activities, and the various risks arising from this endeavor can affect these stakeholders. Additionally, the impact of adverse factors such as policy discontinuity and inequitable distribution of benefits among stakeholders can easily result in collective tensions or conflicts, as well as the gradual emergence of potential social frictions and confrontations. These social risks (SRs) not only impede the smooth execution of urban renewal projects but also pose challenges to social harmony and stability. Hence, to mitigate and control the SRs in the UR process (URSRs) and ensure the successful implementation of effective and sustainable UR projects, it is of paramount importance to gain a comprehensive understanding of the occurrence and evolution mechanisms of these SRs. Although existing studies have touched upon the influence of stakeholder conflicts on URSRs, there remains a lack of systematic examination of the evolution mechanisms of these risks from the perspective of stakeholder theory. The resulting fragmented and specialized comprehension of URSRs has hindered the effectiveness of risk governance strategies. This study adopts stakeholder theory to analyze the potential sources of risk throughout the entire UR process. By considering the conflicts of interests among stakeholders, a systematic analysis of the evolution mechanisms of URSRs is explored and targeted governance recommendations for URSRs are proposed. Full article
(This article belongs to the Special Issue Urban Infrastructure and Resilient, Sustainable Buildings)
Show Figures

Figure 1

21 pages, 1647 KiB  
Article
Artificial Intelligence Approach for Classifying Images of Upper-Atmospheric Transient Luminous Events
by Axi Aguilera and Vidya Manian
Sensors 2024, 24(10), 3208; https://doi.org/10.3390/s24103208 (registering DOI) - 18 May 2024
Abstract
Transient Luminous Events (TLEs) are short-lived, upper-atmospheric optical phenomena associated with thunderstorms. Their rapid and random occurrence makes manual classification laborious and time-consuming. This study presents an effective approach to automating the classification of TLEs using state-of-the-art Convolutional Neural Networks (CNNs) and a [...] Read more.
Transient Luminous Events (TLEs) are short-lived, upper-atmospheric optical phenomena associated with thunderstorms. Their rapid and random occurrence makes manual classification laborious and time-consuming. This study presents an effective approach to automating the classification of TLEs using state-of-the-art Convolutional Neural Networks (CNNs) and a Vision Transformer (ViT). The ViT architecture and four different CNN architectures, namely, ResNet50, ResNet18, GoogLeNet, and SqueezeNet, are employed and their performance is evaluated based on their accuracy and execution time. The models are trained on a dataset that was augmented using rotation, translation, and flipping techniques to increase its size and diversity. Additionally, the images are preprocessed using bilateral filtering to enhance their quality. The results show high classification accuracy across all models, with ResNet50 achieving the highest accuracy. However, a trade-off is observed between accuracy and execution time, which should be considered based on the specific requirements of the task. This study demonstrates the feasibility and effectiveness of using transfer learning and pre-trained CNNs for the automated classification of TLEs. Full article
(This article belongs to the Special Issue Applications of Video Processing and Computer Vision Sensor II)
Show Figures

Figure 1

15 pages, 2629 KiB  
Article
The Resilience of Electrical Support in UAV Swarms in Special Missions
by Igor Kabashkin
Energies 2024, 17(10), 2422; https://doi.org/10.3390/en17102422 (registering DOI) - 18 May 2024
Abstract
Unmanned aerial vehicle (UAV) swarms serve as a dynamic platform for diverse missions, including communication relays, search and rescue operations, and environmental monitoring. The success of these operations crucially depends on the resilience of their electrical support systems, especially in terms of battery [...] Read more.
Unmanned aerial vehicle (UAV) swarms serve as a dynamic platform for diverse missions, including communication relays, search and rescue operations, and environmental monitoring. The success of these operations crucially depends on the resilience of their electrical support systems, especially in terms of battery management. This paper examines the reliability of electrical support for UAV swarms engaged in missions that require prioritization into high and low categories. The paper proposes a dynamic resource allocation strategy that permits the flexible reassignment of drones across different-priority tasks, ensuring continuous operation while optimizing resource use. By leveraging the Markov chain theory, an analytical model for the evaluation of the resilience of the battery management system under different operational scenarios was developed. The paper quantitatively assesses the impact of different operational strategies and battery management approaches on the overall system resilience and mission efficacy. This approach aims to ensure uninterrupted service delivery for critical tasks while optimizing the overall utilization of available electrical resources. Through modeling and analytical evaluations, the paper quantifies the impact of various parameters and operating strategies on overall system resilience and mission availability, considering the utilization strategies of batteries and their reliability and maintenance metrics. The developed models and strategies can inform the development of robust battery management protocols, resource allocation algorithms, and mission planning frameworks, ultimately enhancing the operational availability and effectiveness of UAV swarms in critical special missions. Full article
(This article belongs to the Section F: Electrical Engineering)
Show Figures

Figure 1

28 pages, 6894 KiB  
Article
Geochemistry of Arsenic and Salinity-Contaminated Groundwater and Mineralogy of Sediments in the Coastal Aquifers of Southwest Bangladesh
by Md Riaz Uddin, Ashraf Uddin, Ming-Kuo Lee, Jake Nelson, Anwar Zahid, Md Maruful Haque and Nazmus Sakib
Water 2024, 16(10), 1442; https://doi.org/10.3390/w16101442 (registering DOI) - 18 May 2024
Abstract
This study aimed to develop a geochemical database by thoroughly analyzing groundwater and sediments from coastal aquifers of southwest Bangladesh. Moreover, we investigated the source of sediment deposition and the mechanisms behind the presence of arsenic and salinity in groundwater. The seasonal distribution [...] Read more.
This study aimed to develop a geochemical database by thoroughly analyzing groundwater and sediments from coastal aquifers of southwest Bangladesh. Moreover, we investigated the source of sediment deposition and the mechanisms behind the presence of arsenic and salinity in groundwater. The seasonal distribution patterns of arsenic among the shallow and deep coastal aquifers were found to be 45.12 µg/l and 20.65 µg/l during dry and wet seasons, respectively. Moreover, the groundwater salinity distribution ranged from 3262.88 mg/l to 1930.88 mg/l during the dry and wet seasons. Cored sediment samples showed fine to medium sands of 92%, with silt and clay particles. The petrographic study of authigenic and heavy minerals revealed that the mineral grains were subangular to angular, indicating their textural immaturity of coastal sediments. The reactivity of goethite (FeOOH) and siderite (FeCO3) minerals suggests that the aquifers were subjected to slightly oxidized to moderately reducing conditions, with ORP values ranging from +50.40 mv to −149.5 mv. Such redox conditions could potentially result in the enrichment and mobility of arsenic in the groundwater. Although arsenic concentrations in deep aquifers are relatively low, higher salinity values are found in both shallow and intermediate coastal aquifers. Full article
(This article belongs to the Section Water Quality and Contamination)
23 pages, 624 KiB  
Article
The Impact of the Digital Economy on Population Dividends in China: Based on the Dual Perspective of Quantity and Quality
by Jingyi Qin and Qingyu Xu
Sustainability 2024, 16(10), 4254; https://doi.org/10.3390/su16104254 (registering DOI) - 18 May 2024
Abstract
The demographic dividend plays an important role in promoting sustainable development in China. Here, we ask the question of how to use the digital economy to coordinate the “one body and two sides” of the demographic dividend. This study empirically examines the impact [...] Read more.
The demographic dividend plays an important role in promoting sustainable development in China. Here, we ask the question of how to use the digital economy to coordinate the “one body and two sides” of the demographic dividend. This study empirically examines the impact of digital economic development on the demographic dividend in a multidimensional way based on the panel data from 30 provincial-level administrative regions in China from 2011 to 2020. The study results show that (1) the digital economy significantly promotes the demographic quality dividend but exhibits a suppressive effect on the demographic quantity dividend; (2) the digital economy can indirectly influence the demographic quality and quantity dividends through urbanization; (3) when examining the threshold effects, the study uncovers noteworthy dynamics, whereby the urbanization levels serve as significant thresholds, showcasing “diminishing marginal effects” in the digital economy’s influence on both population quantity and quality dividends; (4) digital economic development has a positive spillover effect on the demographic quantity dividend in adjacent areas. By clarifying these dynamics, the research results provide valuable insights into China’s sustainable use of the digital economy to create a demographic dividend. Full article
12 pages, 3585 KiB  
Article
The Role of T2 Mapping in Cardiac Amyloidosis
by Giulia Grazzini, Silvia Pradella, Rossella Bani, Chiara Fornaciari, Francesco Cappelli, Federico Perfetto, Diletta Cozzi, Simona Giovannelli, Giacomo Sica and Vittorio Miele
Diagnostics 2024, 14(10), 1048; https://doi.org/10.3390/diagnostics14101048 (registering DOI) - 18 May 2024
Abstract
Cardiac amyloidosis (CA) is an infiltrative cardiomyopathy divided into two types: light-chain (LA) and transthyretin (ATTR) CA. Cardiac magnetic resonance (CMR) has emerged as an important diagnostic tool in CA. While late gadolinium enhancement (LGE), T1 mapping and extracellular volume (ECV) have a [...] Read more.
Cardiac amyloidosis (CA) is an infiltrative cardiomyopathy divided into two types: light-chain (LA) and transthyretin (ATTR) CA. Cardiac magnetic resonance (CMR) has emerged as an important diagnostic tool in CA. While late gadolinium enhancement (LGE), T1 mapping and extracellular volume (ECV) have a consolidate role in the assessment of CA, T2 mapping has been less often evaluated. We aimed to test the value of T2 mapping in the evaluation of CA. This study recruited 70 patients with CA (51 ATTR, 19 AL). All the subjects underwent 1.5 T CMR with T1 and T2 mapping and cine and LGE imaging. Their QALE scores were evaluated. The myocardial T2 values were significantly (p < 0.001) increased in both types of CA compared to the controls. In the AL-CA group, increased T2 values were associated with a higher QALE score. The myocardial native T1 values and ECV were significantly (p < 0.001) higher in the CA patients than in the healthy subjects. Left ventricular (LV) mass, QALE score and ECV were higher in ATTR amyloidosis compared with AL amyloidosis, while the LV ejection fraction was lower (p < 0.001). These results support the concept of the presence of myocardial edema in CA. Therefore, a CMR evaluation including not only myocardial T1 imaging but also myocardial T2 imaging allows for more comprehensive tissue characterization in CA. Full article
Show Figures

Figure 1

11 pages, 430 KiB  
Article
Androgen Deprivation Therapy and Newly Developed Neovascular Age-Related Macular Degeneration Risk in Patients with Prostate Cancer
by Jee Soo Ha, Do Kyung Kim, Hye Sun Lee, Soyoung Jeon, Jinhyung Jeon, Daeho Kim, June Seok Kim, Byeongseon Kim, Min Kim and Kang Su Cho
J. Clin. Med. 2024, 13(10), 2978; https://doi.org/10.3390/jcm13102978 (registering DOI) - 18 May 2024
Abstract
Background/Objectives: to evaluate the association between androgen deprivation therapy (ADT) and newly developed neovascular age-related macular degeneration (AMD) in patients with prostate cancer. Methods: We identified 228,803 men from the nationwide claims database in the Republic of Korea diagnosed with prostate [...] Read more.
Background/Objectives: to evaluate the association between androgen deprivation therapy (ADT) and newly developed neovascular age-related macular degeneration (AMD) in patients with prostate cancer. Methods: We identified 228,803 men from the nationwide claims database in the Republic of Korea diagnosed with prostate cancer between 1 August 2009 and 31 December 2018 and followed until April 2021. Cases were defined as those newly diagnosed with neovascular AMD during follow-up. Cases were matched with controls based on age, index date, and follow-up duration, at a case-to-control ratio of 1:4. Adjusted odds ratios (aORs) of incident neovascular AMD associated with ADT were estimated using conditional logistic regression. Results: The main analysis included 1700 cases and 6800 controls, with a median follow-up of 3.42 years. ADT was associated with a reduced risk of incident neovascular AMD in patients with prostate cancer (aOR = 0.840; 95% confidence interval [CI], 0.743–0.951; p = 0.0058) in the multivariable analysis. A cumulative ADT duration less than 1 year was associated with a reduced risk of neovascular AMD (aOR = 0.727; 95% CI, 0.610–0.866; p = 0.0004); however, no association was observed when the duration of ADT was between 1 and 2 years (aOR = 0.862; 95% CI, 0.693–1.074; p = 0.1854) or more than 2 years (aOR = 1.009; 95% CI, 0.830–1.226; p = 0.9304). Conclusions: In patients with prostate cancer, medical castration for less than a year is associated with a reduced risk of incident neovascular AMD. These results suggest that androgens are involved in the pathogenesis of neovascular AMD. Full article
(This article belongs to the Section Nephrology & Urology)
Show Figures

Figure 1

23 pages, 672 KiB  
Article
An Assessment of Semaglutide Safety Based on Real World Data: From Popularity to Spontaneous Reporting in EudraVigilance Database
by Anca Butuca, Carmen Maximiliana Dobrea, Anca Maria Arseniu, Adina Frum, Adriana Aurelia Chis, Luca Liviu Rus, Steliana Ghibu, Anca Maria Juncan, Andrei Catalin Muntean, Antonina Evelina Lazăr, Felicia Gabriela Gligor, Claudiu Morgovan and Andreea Loredana Vonica-Tincu
Biomedicines 2024, 12(5), 1124; https://doi.org/10.3390/biomedicines12051124 (registering DOI) - 18 May 2024
Abstract
Some glucagon-like peptide-1 receptor agonists (GLP-1 RAs), first used in the treatment of type 2 diabetes mellitus (T2DM), have been approved for the treatment of obesity in patients with or without T2DM (liraglutide—LIR, semaglutide—SEM, and tirzepatide—TIR). Social media had an important influence on [...] Read more.
Some glucagon-like peptide-1 receptor agonists (GLP-1 RAs), first used in the treatment of type 2 diabetes mellitus (T2DM), have been approved for the treatment of obesity in patients with or without T2DM (liraglutide—LIR, semaglutide—SEM, and tirzepatide—TIR). Social media had an important influence on the off-label use of GLP-1 RAs for obesity, especially for SEM. We analyzed the Google queries related to SEM to assess people’s interest in this drug. We also investigated the occurrence of adverse drug reactions (ADRs) by searching the EudraVigilance database (EV) for Individual Case Safety Reports (ICSRs) that reported SEM as the suspected drug and performed a descriptive and a disproportionality analysis. The data obtained for SEM were compared to other GLP-1 RAs. SEM had the highest proportions of searches on Google associated with the term “weight loss” and presented the lowest number of severe ADRs, but it also had the highest number of ICSRs reported in EV. Even though no unexpected safety issues have been reported for it until now, SEM has a hi3gh tendency for overdose reports. The most frequent off-label use was reported for SEM and TIR. In order to lower the risks of ADRs, the off-label use should be reduced and carefully monitored. Full article
(This article belongs to the Special Issue Diabetes: Comorbidities, Therapeutics and Insights)
23 pages, 1131 KiB  
Review
The Best Protocol to Treat Equine Skin Wounds by Second Intention Healing: A Scoping Review of the Literature
by Gesiane Ribeiro, Lúcia Carvalho, João Borges and José Prazeres
Animals 2024, 14(10), 1500; https://doi.org/10.3390/ani14101500 (registering DOI) - 18 May 2024
Abstract
Equine skin wound treatment continues to be a challenge for veterinarians. Despite being a frequent practice, it remains difficult to choose an evidence-based treatment protocol. This study aimed to comprehensively explore the literature and provide a scoping review of therapeutic strategies for equine [...] Read more.
Equine skin wound treatment continues to be a challenge for veterinarians. Despite being a frequent practice, it remains difficult to choose an evidence-based treatment protocol. This study aimed to comprehensively explore the literature and provide a scoping review of therapeutic strategies for equine skin wounds and identify knowledge gaps and opportunities for future research. This review was conducted using specific criteria to select literature that described methods to manage second intention wound healing. After removing duplicates and screening papers for suitability, 81 manuscripts were included for data extraction. Of these, 59 articles were experimental studies, 10 were case reports, 9 were case series, and 3 were clinical studies. The most frequent wound location was the distal limbs. Macroscopic assessment was the main tool used to evaluate treatment effectiveness. All of the case reports, case series, and clinical studies reported positive outcomes with regard to the treatment used, while only 36% of the experimental studies found significant healing improvement in treated wounds compared to control groups. It was found that there are many treatments that have exhibited controversial results, and there exists a lack of evidence for the adoption of specific treatment protocols. Full article
(This article belongs to the Special Issue Equine Veterinary Surgery)
Show Figures

Figure 1

13 pages, 5575 KiB  
Article
The Conversion of Li2SnO3 Li-Ion Hybrid Supercapacitors from Pastes Containing LiCl-SnCl2 Liquid Precursors Using an Atmospheric-Pressure Plasma Jet
by Hong-Kai Chen, Heng-Min Chang, Bo-Yan Hong, Shuo-En Yu, I-Chih Ni, Chih-I Wu, Cheng-Che Hsu, I-Chun Cheng and Jian-Zhang Chen
J. Compos. Sci. 2024, 8(5), 189; https://doi.org/10.3390/jcs8050189 (registering DOI) - 18 May 2024
Abstract
We fabricate lithium tin-based oxide Li2SnO3 on carbon cloth from a gel-state precursor containing LiCl and SnCl2·2H2O using a nitrogen atmospheric-pressure plasma jet (APPJ). APPJ treatment provides both a high-temperature environment for the conversion of precursor [...] Read more.
We fabricate lithium tin-based oxide Li2SnO3 on carbon cloth from a gel-state precursor containing LiCl and SnCl2·2H2O using a nitrogen atmospheric-pressure plasma jet (APPJ). APPJ treatment provides both a high-temperature environment for the conversion of precursor into Li2SnO3 and nitrogen plasma reactive species for electrode surface modification. Here, the best electrochemical performance for the Li2SnO3 Li-ion hybrid supercapacitors (Li–HSCs) is achieved with 480 s of APPJ processing. The areal capacity of the 480 s APPJ-processed Li2SnO3 Li–HSCs reached 46.113 mC/cm2. The results indicate that APPJ is an effective tool for the rapid conversion processing of Li2SnO3 electrodes for Li–HSCs. Full article
Show Figures

Figure 1

20 pages, 405 KiB  
Article
Comparative Analysis between Quality of Life and Human Labor in Countries Belonging to G7 and BRICS Blocks: Proposition of Discriminant Analysis Model
by Gustavo Carolino Girardi, Priscila Rubbo, Evandro Eduardo Broday, Maik Arnold and Claudia Tania Picinin
Economies 2024, 12(5), 124; https://doi.org/10.3390/economies12050124 (registering DOI) - 18 May 2024
Abstract
The aim of the present research is to identify and analyze the variables which help to effectively differentiate Quality of Life (QoL) and human labor in the G7 (Germany, France, Italy, Canada, Japan, United Kingdom, and United States of America—USA) and BRICS countries [...] Read more.
The aim of the present research is to identify and analyze the variables which help to effectively differentiate Quality of Life (QoL) and human labor in the G7 (Germany, France, Italy, Canada, Japan, United Kingdom, and United States of America—USA) and BRICS countries (Brazil, Russia, India, China, and South Africa) through a discriminant analysis. A discriminant analysis model is developed to classify countries as having a low, mid, or high QoL based on QoL and human labor variables. The variables used in the discriminant analysis were obtained between 2010 and 2022 from two platforms: NUMBEO variables capable of relating QoL to socioeconomic aspects and OECD’s (Organization for Economic Cooperation and Development) human-labor-related variables. Based on the results, the three variables that most discriminate the groups in order of importance are employed women in relation to the female population, the female labor force participation rate, and the female unemployment rate. Countries are classified as having a low, mid, or high QoL. The adopted technique will allow researchers and managers to classify and draw goals for action reorganization and investment in QoL and labor. Full article
(This article belongs to the Special Issue Innovation, Productivity and Economic Growth: New Insights)
13 pages, 2803 KiB  
Article
Advances in the Sustainable Production of Fertilizers from Spent Zinc-Based Batteries
by Silvia Patricia Barragán-Mantilla, Raquel Ortiz, Patricia Almendros, Laura Sánchez-Martín, Gabriel Gascó and Ana Méndez
Sustainability 2024, 16(10), 4255; https://doi.org/10.3390/su16104255 (registering DOI) - 18 May 2024
Abstract
Wastes from spent batteries are a secondary source of raw materials. To ensure this, it is mandatory to design sustainable and low-cost processes. In the case of alkaline and zinc–carbon-based batteries, the high content of Zn and Mn makes them of interest in [...] Read more.
Wastes from spent batteries are a secondary source of raw materials. To ensure this, it is mandatory to design sustainable and low-cost processes. In the case of alkaline and zinc–carbon-based batteries, the high content of Zn and Mn makes them of interest in the development of fertilizers. The main objective of this research is to study the fertilizers production from spent zinc-based batteries, using sulfuric acid, citric acid (CIT) and glycine (GLY) solutions as leaching agents. Leaching with glycine at alkaline pHs shows a high selectivity of Zn over Mn, whereas the use of citric and sulfuric solutions leads to recoveries of Zn and Mn. Solutions with the highest Zn recoveries were tested in sand columns. Commercial ZnSO4 heptahydrate was used as a control. For sulfuric acid, two solutions (H2SO4 2M and 0.25M) were used. The elution of leached Zn and Mn in sand columns depended on the solution added. The Zn-Mn-CIT treatment showed a slight but steady increase in the leachates, reaching 70% and 75% of the total leached Zn and Mn, respectively, in the medium term. The Zn-Mn-H2SO4 2M and ZnSO4 treatments showed a similar behavior in Zn release. Both Zn-Mn-GLY and Zn-Mn-H2SO4 0.25M treatments showed similar amounts of leached Mn in the medium term (77% of total leached Mn), differing in the leached Zn. Solutions from the leaching of spent black mass batteries, especially Zn-Mn-CIT or Zn-Mn-GLY, showed promising behavior as fertilizer from the point of view of Zn and Mn availability as nutrients. Full article
(This article belongs to the Special Issue Sustainable Waste Management in the Context of Urban Environment)
Show Figures

Figure 1

11 pages, 3918 KiB  
Article
Improvement of Qualitative Analyses of Aliphatic Alcohols Using Direct Catalytic Fuel Cell and Chemometric Analysis Format
by Mauro Tomassetti, Federico Marini, Riccardo Pezzilli, Mauro Castrucci, Corrado Di Natale and Luigi Campanella
Sensors 2024, 24(10), 3209; https://doi.org/10.3390/s24103209 (registering DOI) - 18 May 2024
Abstract
Direct catalytic methanol fuel cells (DCMFCs) have been studied for several years for energy conversion. Less extensive is the investigation of their analytical properties. In this paper, we demonstrate that the behavior of both the discharge and charger curves of DCMFCs depends on [...] Read more.
Direct catalytic methanol fuel cells (DCMFCs) have been studied for several years for energy conversion. Less extensive is the investigation of their analytical properties. In this paper, we demonstrate that the behavior of both the discharge and charger curves of DCMFCs depends on the chemical composition of the solution injected in the fuel cell. Their discharge and charge curves, analyzed using a chemometric data fusion method named ComDim, enable the identification of various types of aliphatic alcohols diluted in water. The results also show that the identification of alcohols can be obtained from the first portion of the discharge and charge curves. To this end, the curves have been described by a set of features related to the slope and intercept of the initial portion of the curves. The ComDim analysis of this set of features shows that the identification of alcohols can be obtained in a time that is about thirty times shorter than the time taken to achieve steady-state voltage. Full article
(This article belongs to the Section Chemical Sensors)
Show Figures

Figure 1

18 pages, 4207 KiB  
Article
Plastid Phylogenetics, Biogeography, and Character Evolution of the Chinese Endemic Genus Sinojackia Hu
by Xing Jian, Yuliang Wang, Qiang Li and Yongmei Miao
Diversity 2024, 16(5), 305; https://doi.org/10.3390/d16050305 (registering DOI) - 18 May 2024
Abstract
Sinojackia Hu. comprises five to eight Chinese endemic species with high ornamental and medicinal value. However, the generic limits, interspecific relationships and evolutionary history of the genus remain unresolved. In this study, we newly sequenced three plastomes of S. oblongicarpa and compared them [...] Read more.
Sinojackia Hu. comprises five to eight Chinese endemic species with high ornamental and medicinal value. However, the generic limits, interspecific relationships and evolutionary history of the genus remain unresolved. In this study, we newly sequenced three plastomes of S. oblongicarpa and compared them with those of the other congeneric species to explore the taxonomic delimitation of the species and the evolutionary history of the genus. The plastome structure of Sinojackia species was extremely conserved in terms of number of genes, sequence length, and GC content. The codon usage patterns revealed that natural selection may be the main factor shaping codon usage bias. Our phylogenetic tree shows that Sinojackia is monophyletic and can be divided into two clades. Sinojackia oblongicarpa as a distinct species is supported for it is distantly related to S. sarcocarpa. The evolutionary analysis of morphological features indicates that the woody mesocarp is an ancestral feature. Sinojackia originated in central Southeast China during the early Miocene. In this period, it experienced elevated diversification and migrated from central Southeast China to the Hunan Province and the Sichuan Province with the development of the Asian monsoon and East Asian flora. Glacial–interglacial interactions with the monsoon climate may provide favorable expansion conditions for Sinojackia on a small scale. Full article
(This article belongs to the Special Issue Diversity in 2024)
Show Figures

Figure 1

Open Access Journals

Browse by Indexing Browse by Subject Selected Journals
Back to TopTop